Improve the performance of your BearEbike with the available packages.
The packages modify our vehicles and improve their performance.
The packages modify our vehicles and improve their performance.
Rewinding the engine to a coil of 31x5 or 27x6 for the Nitro model, or 73x3, 55x4, 45x5, 38x6 for other models (coil type chosen after consultation with the vehicle owner).
Modification of the inverter software, allowing for a 30-40% increase in power, range, or acceleration (depending on the vehicle owner's preference).
Modification of the battery management system (BMS) for higher current-voltage efficiency.
Note: Requires prior purchase of Upgrade Package 1
Serial engine housings are replaced with housings made of forged aluminum, enhancing the engine's temperature performance.
Tubeless system for the rear tire, enabling the vehicle to be used with very low pressure in summer or with studs in full icing conditions.
Modification of the inverter software, allowing for a 30-40% increase in power, range, or acceleration (depending on the vehicle owner's preference).
Only for Nitro and Military versions.
20% stiffer spring, additional seals allowing for open oil bath, third upside-down bearing in the fork.
Only for Nitro and Military versions.
Öhlins DH38 with m.1 damper and 40mm offset crowns and 200mm travel.
Öhlins TTX 22M Custom with 250mm travel, along with dedicated mounting bushings.
Spring ranging from 300 to 650lbs, tailored to the user's weight.
Comfortable motorcycle saddle upholstered with waterproof thread and BearEbike logo, mounted on a dedicated seat frame in place of the standard bicycle saddle. The motorcycle seat features dedicated mounting for turn signals and license plate holder with lighting.
Motorcycle pegs with a locking system, directly mounted to the vehicle frame. This modification removes the following components from the vehicle: crank, pedals, chain, and freewheel. Upon request, the bottom bracket cartridge can also be removed.
To give your vehicle a new color scheme, it must be disassembled down to the smallest screw. The upgrade cost also includes a comprehensive inspection of components, as well as disassembly, assembly, and the same rigorous internal tests that new vehicles undergo before leaving our factory. The main base elements will also be covered with clear protective film during transportation if necessary.
We will prepare your vehicle in the color scheme of your choice. All our frames are painted with powder coatings, and based on your preferences and our experience, we can create a truly interesting color combination unique to each BearEbike vehicle component.
Tired of black rims? Certainly, a new color scheme for your wheels, including spokes, will capture the spirit of your adventure.
The rear suspension is an element we cannot overlook when completely changing the color scheme of your vehicle.